TotalBoat Aluminum Boat Paint for Canoes, Bass Boats, Dinghies, Duck Boats, Jon Boats and Pontoons (Army Green, 1 Quarts (Pack of 1))

TotalBoat Aluminum Boat Paint gives aluminum and galvanized metal boats a corrosion-resistant, non-reflective low-sheen finish. While most marine paints won’t stick very well, TotalBoat is specifically formulated for aluminum, making it ideal for your jon boat, duck boat, flat bottom boats, bass boats, canoe, dinghy, pontoon boat, trailers, houseboats, and other aluminum boats or boat parts, such as railings and spars. It also comes in camo colors that you can apply one layer at a time for a custom camouflage pattern to improve concealment in natural settings. Or mix colors for a more realistic blend for your particular hunting or fishing area to conceal your duck or hunting blind, tree stands and ladders.

Apply directly to metal as a topcoat, or use as a primer and apply the topcoat of your choice. This easy-to-use water-based polyurethane can be applied directly to prepared substrates with a brush, roller or spray gun. No need to etch or prime first, saving time and effort. You’ll also finish faster because Aluminum Boat paint dries extremely fast; overcoat in just 1 hour at 72 degrees F without sanding between coats. Before the final coat, wait 12 hours, sand lightly and remove residue. Let the final coat dry for 48 hours, and you’re ready to put the boat in the water.

TotalBoat Aluminum Boat Paint can be used above or below the waterline on boats used in fresh or salt water. Chromate-free finish has a low VOC content of 75 g/L, very little odor, and cleans up easily with soap and water. Note: TotalBoat Aluminum Boat Paint does not prevent barnacles and weeds from clinging to your boat bottom. For protection use TotalBoat AlumiPaint AF bottom paint for aluminum boats. Compare to flat finish paints like Sea Hawk Aluma Hawk, Majic Paints Camouflage Paint, Parker Coatings Duck Boat Paint and Duralux Aluminum Boat Marine Paint. All TotalBoat products are developed for boaters by boaters, to provide great value and great results. 100% made in the USA.

Make sure this fits by entering your model number.
TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion
ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting
EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming
ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won’t peel, chip, or fade
AVAILABLE IN EARTH BROWN, FLAT DARK EARTH, KHAKI, BLACK, WHITE, LIGHT GRAY, ARMY GREEN, AND OLIVE DRAB); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline